Italian Pot Roast (Stracotto) Recipe (2024)

Ratings

4

out of 5

946

user ratings

Your rating

or to rate this recipe.

Have you cooked this?

or to mark this recipe as cooked.

Private Notes

Leave a Private Note on this recipe and see it here.

Cooking Notes

Gary

Very tasty dish! I used a rump roast (less fat to deal with in the end compared to chuck), which turned out exceedingly succulent and tender. I also cooked this in a 250-degree oven after step 3 for about 3 1/2 hours (less worry about burning the sauce on the bottom). The pureed sauce is a nice gravy, without having to use flour, and was great on garlic mashed potatoes which I served as an accompaniment.

Mark

What oven temp did you use?

k8

She's cooking it on the stovetop on very low heat. Step 4 in her recipe. I have cooked mine in the oven at 300 degrees. The article this recipe was featured in suggests a 350 oven

Carole

I use dry leaves of laurel instead of basil and grate in some nutmeg. We use that a lot in my area in Italy.
This dish is a family favourite and so simple that it's my 13yo son's signature dish.

Randy

This has far less liquid than a typical pot roast so you would have to be careful with the temperature. I suggest that you could stay within the timing of the stove-top instructions if you cooked it in a 275 oven for 3 hours. The only hassle with the oven will be turning the meat every 1/2 hour (which is necessary because of the low liquid volume) to ensure even cooking.
If you used a pork shoulder instead this would be very similar to a Neapolitan Ragu.

CC Rose cooks

It looks as though this is cooked on top of the stove, long and slow, not in the oven. Probably a slow cooker/crock pot would work as well.

Gail P

Tomato paste needs cooking, to remove the "canned" taste, so I'll add it to the pot just before the vegetables have finished browning (Step 2), and stir it in for 2-3 minutes before continuing to Step 3.

bjd

The chuck pot roast I used was rolled by the butcher. I skipped step 1 and added a few cloves of garlic (smashed) to the vegetables in step 2. I added a cup of veal and wine gravy that I had frozen previously and a half cup of co*ke (rather than more wine).

Jeffrey McLaughlin

I believe this is totally done on your stove top.

Annie

Been there, done this time and again, except not with basal but dried oregano. Tip - this works well with lamb shoulder roast as well. It's truly very authentically Italian. Love it.

Cheryl

I cooked it for 6 hours on low in my slow cooker. It was fabulous! I found that it served especially well with a cheesy polenta!

Steve

3 hours at 275 degrees F for a 3 pound boneless Chuck roast was perfect. Very tender but still holds together so you can slice it

TriciaPDX

Since the onions, carrots, celery and tomatoes are all chopped, not sliced, it appears that they are all part of the sauce and therefore you would puree the whole pot minus the roast itself.

Diane

I did this in the slow cooker. Pretty much followed the recipe; cooked the tomato paste, let the wine cook away, used a can of drained diced tomatoes, used fresh rosemary instead of basil, threw in a few anchovies, used crushed garlic cloves in the mix. Low heat for 8 hrs. Sliced meat, pureed sauce, let the meat sit in the sauce in the fridge for a couple of days. Wow.

Chef Mike Benninger

I've done this recipe with steps 1-3 on the stove top in a heavy cast iron pan, then step 4 and on in the slow cooker on low for 4 hours, works perfectly. I did find that you will need about 3 TBSP Kosher salt to give it good flavour, that's a good sized cut of beef...

Mikey

I know I will probably get some hate for this, but I made some changes to this recipe to appease my family. In my household pot roast is not pot roast unless there is potatoes and carrots in it. Not puréed carrots and potatoes, but big chunks. So basically I made this recipe as is, then puréed the delicious sauce, and then added in some large chunks of potatoes and carrots and let it simmer for another hour or two. Came out great.

Chronic gourmet

Great success! Used a wagyu shoulder roast, fresh basil and rosemary, threw in a couple of anchovies, a primitivo wine, and used leftover tomato sauce I had instead of tomato paste/tomatoes. Seemed to be very little liquid so I added a little less than a cup of beef broth. Simmered for three hours, and used immersion blender to puree sauce. Consistency was just right, no need to reduce. Meat was perfectly cooked and sauce was delightful over egg noodles.

Joyce, Highlands, NC

Just fantastic. Great the next day. Freezes well.I added more liquids . The sauce is wonderful.

Jamey

This was really good. Followed the recipe to a T. The chuck roast was very tender. It was almost better as leftovers. Lots of potential for modification in the future as well.

Sue

1. This is similar to “Grandpa Joe’s Pot Roast.” He was a chef/cook at the Blackhawk Restaurant in Chicago in late 40’s through early 60’s when he retired. He and my grandmother were from Northern Italy (neither were fans of olive oil or garlic… just a wee bit garlic... no EVOO. Just butter for cooking or plain vegetable oil for salads). At the end of his career, he was fish and sauce chef - always tasting the cooking liquid and sauce to be sure it was perfect – reduction was his magic.

Sue

2. Grandpa Joe’s: Braise a 2 ½ - 3-lbs chuck or rump roast with a little salt and pepper in oil (Note: I use a bit of bacon and EVOO). Remove it from the pot, add sliced onions and sauté until soft. Then add a little chopped garlic. Next place roast back in and add c. ¼-1/2 c red wine… cover for a little and then remove and let it almost evaporate.Next, add beef broth, stock, cover and let it simmer. Next add1 – 28 oz can of whole tomatoes with juice. Starton stove.

girlwithaknife

Per a commenter, I did this using a 3lb bottom roast in the instant pot for 50 minutes then natural release, then sliced it paper thin while reducing the sauce (I ended up with like 6 cups of liquid!). So delicious it ran out quickly at a potluck! I have another smaller roast and will try ~10 minutes high pressure to get a medium doneness.

Joe

This was fabulous! Didn’t have any fresh basil so used a bunch of dry herbs, and they worked great. Next time I might add a couple anchovies and a bay leaf (to be removed before using an immersion blender to make the sauce). May just be my new go-to pot roast recipe!

Michael M

I’ve made this several times with exc results. Cook in a large Dutch oven w tight fitting lid. I usually get a somewhat larger tied boneless chuck, about 4# & adjust up other ingredients accordingly. ALWAYS refrigerate overnight then purée the liquid and veggies in a food processor and serve with meat and mashed potatoes. Used a Gigondas which certainly qualifies as a dry robust red!

Sarah

This had really been excellent flavor and sauce worth saving. Christmas time 2022.

Ann

A lot of work for such a small yield. Nice flavor though.

Brad K

I made it with a 2.6 pound chuck roast and after browning transferred to a slow cooker on high for 3:45 hours. The meat was perfect. However, we found the sauce to be bland. While it smelled great cooking, overall probably won’t make it again. I used half a cup of basil and even added a teaspoon of red pepper flakes.

Mike Sasges

We found that 3 tsp of kosher salt was the right amount for us in this recipe. We had it with cheesy polenta as another commenter suggested and it was very tasty!

kevin

I found this recipe to be WAY to general and lacking in specific direction. Like “cook for 3 hours on low heat”. WHAT? I’ve done this dish successfully before but I couldn’t find my old recipe. This one doesn’t stand up.

Joan

I've cooked this roast in a slow cooker many times. It's always a crowd pleaser and the house smells great!

Private notes are only visible to you.

Italian Pot Roast (Stracotto) Recipe (2024)

FAQs

Does pot roast get more tender the longer it cooks in the oven? ›

Yes, pot roast absolutely becomes more tender the longer it cooks. Roasts are generally made from tougher cuts of meat, such as chuck or brisket, which contain a lot of collagen, connective tissue, and fat. These tougher tissues require a long cooking time to break down and for the collagen to converts into gelatin.

How do I make sure my pot roast is tender? ›

Whether you cook your pot roast using a stovetop, oven, slow cooker, or pressure cooker method, you'll always get the most tender and flavorful results if you use low temperatures over a long period of time. That's what it takes to melt down the tough connective tissue in the meat until you can cut it with a fork.

What makes pot roast better? ›

The best meat for pot roast is a beef cut with abundant connective tissue, like chuck roast, beef brisket or bottom round roast. This connective tissue called collagen is what makes pot roast melt-in-your-mouth tender.

What thickens a pot roast? ›

Some of the most common methods include: Flour: Mix flour with a little cold water to form a paste, and then slowly stir it into the stew or pot roast. Be sure to cook the stew or pot roast for an additional 5-10 minutes after adding the flour mixture to allow it to thicken.

Why is my roast still tough after 8 hours? ›

There are several reasons why this could have happened even after so much cooking. First, your choice of a rump roast could be a factor since cuts from the hind quarter are very muscular and, since muscles are the most resistant to breaking, this cut is quite stubborn when it comes to becoming tender.

Why is my pot roast still tough after 6 hours? ›

Here are some possible explanations:
  • Lean Cut of Meat: The cut of meat you used may have been too lean. ...
  • Insufficient Cooking Time: Six hours may not have been enough time to fully tenderize the meat. ...
  • Low Crock Pot Temperature: The temperature of your crock pot may have been too low.
Jan 19, 2024

What not to do to pot roast? ›

5 Mistakes to Avoid When Cooking Pot Roast
  1. Using the wrong roast.
  2. Not browning the roast.
  3. Deglazing with just broth.
  4. Cooking the vegetables too long.
  5. Not thickening the gravy.
Mar 29, 2017

What is a good tenderizer for roast? ›

Marinate the meat.

Acidic ingredients like vinegar, lemon juice, and even yogurt have a low pH that can assist in tenderizing your beef.

Should pot roast be submerged in liquid? ›

Ultimately, it depends on your preferences and the flavor profile you're aiming to build in your roast, so have fun with it, and don't be afraid to be bold. Just remember there is no need to fully submerge your roast in liquid -- a little goes a long way to making a moist and fork-tender pot roast.

When should I add potatoes to pot roast? ›

Place the roast on top of the onions and season with the salt and pepper. Add 1/4 cup of the broth or water and bring to a simmer. Cover and simmer on low for 2 hours. Add the potatoes, carrots, and quartered onions and cover and slowly simmer for 1 hour longer.

What can I add to pot roast for more flavor? ›

I opt for basil, thyme, paprika, dried bay leaves, and black pepper. These add a lovely, almost Italian-inspired flavor to this pot roast recipe. Veggies. Including onions, garlic, carrots, and potatoes (all of which are also in my beef stew!).

What can I add to my roast to make it taste better? ›

Parsnips and potatoes round out the vegetable portion of the roast, while the addition of garlic, tomato paste, and vinegar in the sauce add an incredible depth of flavor.

How much broth do I need for a pot roast? ›

A common amount of liquid (water, stock, broth, ale, some wine) is 4 cups for a 3 lb to 5 lb roast. Also critical is to keep the pot lidded and to watch the liquid as it tends to leave the pot.

Can you overcook pot roast? ›

Yes, it is possible to overcook a roast or other dishes in a crockpot, even when using the low heat setting for an extended period.

Why did my pot roast turn out tough? ›

With lots of connective tissue (also known as collagen), these cuts can be tough if undercooked or hurried along in the cooking process. However, with slow-cooker pot roast, pressure cooker pot roast, or low-and-slow braised pot roast, the collagen breaks up for tender, succulent meat.

Why is my pot roast tough in the oven? ›

With lots of connective tissue (also known as collagen), these cuts can be tough if undercooked or hurried along in the cooking process. However, with slow-cooker pot roast, pressure cooker pot roast, or low-and-slow braised pot roast, the collagen breaks up for tender, succulent meat.

How long does it take to cook a roast at 250 degrees? ›

As a general rule of thumb, a beef roast will take about 1 hour and 45 minutes to 2 hours and 15 minutes to cook at 250°F, per pound of meat. Here's a rough estimate of cooking time based on size: A 3-pound roast will take about 5 to 6 hours. A 4-pound roast will take about 6 to 8 hours.

Is it better to cook a roast at 325 or 350? ›

When roasting meat and poultry, set the oven temperature to 325°F (163°C) or higher. Explore the charts below to learn how to get great results every time you cook.

Does roast beef get softer the longer you cook it? ›

Your meat will be juicier and more tender

The longer cooking time and the low heat complement each other perfectly. As a result, even though the meat is cooked for far longer, it doesn't dry out because the temperature is low. As a result, this is the best way to retain all the natural juices of the meat.

Top Articles
Latest Posts
Article information

Author: Chrissy Homenick

Last Updated:

Views: 5837

Rating: 4.3 / 5 (74 voted)

Reviews: 81% of readers found this page helpful

Author information

Name: Chrissy Homenick

Birthday: 2001-10-22

Address: 611 Kuhn Oval, Feltonbury, NY 02783-3818

Phone: +96619177651654

Job: Mining Representative

Hobby: amateur radio, Sculling, Knife making, Gardening, Watching movies, Gunsmithing, Video gaming

Introduction: My name is Chrissy Homenick, I am a tender, funny, determined, tender, glorious, fancy, enthusiastic person who loves writing and wants to share my knowledge and understanding with you.